Services...
Support Capabilities
ENGINEERING
- SolidWorks
- Autocad
- EzCam CNC Turning Software
- Surfcam CNC Milling Software
- Scanning Capabilities
- Blueprint Printing and reproduction equipment
- OKUMA TM-APT Off-line CNC programming
- OKUMA MacMan Intranet CNC monitoring
- OMAX CNC Waterjet programming
COMPONENT OUTSIDE PROCESSES
- Grinding
- Heat Treat
- Plating
- Painting
- Roll threading
QUALITY CONTROL
- Quality Analyst 9000 and Minitab Statistical software
- NAVSEA 250-1500
- GE eNCI, PPAP
- ISO 9001-2000
- Gaging Threads - ring and plug with masters
- Pitch micrometers
- O-Ring - internal standards gage
- Bore radius and depth
- Pin and block gage sets
- Indicators - Dial and digital
- Surface plates
- Digital Surface Finish indicators
- Rockwell hardness testing
- Optical Comparitor
- CMM Measurement Station
- Brown & Sharp Gage 2000
Onsite facilities and equipment list
TURNING
- (5) Turning Centers Okuma Crown Standard Series
- 2.0 diameter spindle bore with tailstock
- (1) Turning Center Okuma Crown E Series
- 2.0 diameter spindle bore with tailstock
- (2) Turning Centers Okuma Crown Big Bore
- 2.7 diameter spindle bore with tailstock
- Engine lathe 18" x 80" gap bed
- Engine lathe 14" x 60" gap bed
- Engine lathe 8" x 48"
- (5) turret lathes various capacities
MILLING
- (3) Vertical Machine Centers Okuma
- Cadet 20" x 30" x 40" capacity
- Vertical mill 9" x 49" table
- Vertical mill 10" x 50" table
- (5) vertical mills 9" x 36" table
- (2) vertical mills 12" x 60" table
- Horizontal mill 10" x 50" table
- Indexing mill 48" x 24" table with
GRINDING
- (4) Surface grinders 6" x 12" tables
- Centerless grinder
- Paragon rc-12 0.04" - 1.58" diameter od / id
- Landis 10" x 20" with pathfinder-10 linear readout
WATERJET
- OMAX all materials, 26”x 52” x 4” thick
WELDING
- Dc fluxcore lincoln idealarc 435 amps
- Dc mig lincoln idealarc 200 amps
- Dc fluxcore and mig miller matic swing and extended boom 300
amps
- Ac / dc stick and tig lincoln idealarc 200 amps ac and 250
amps dc
FABRICATION
- Cleveland iron worker 55 ton capacity
- Shear
- 4" x 4" x 1/4" angle
- 14" x 3/8" flat to 1 5/8" diameter
- Punch to 1 3/8" shape in 1/2" thick plate
- Bend to 1/4" thick plate
- Bevel to 1/2" thick plate
DRILLING / ROLL THREADING
- Radial drill press 31" x 48" table
- Radial drill press 18" x 36" table
- (6) cross hole 2 spindle drilling machines
- (4) drill presses various capacities
- Thread rolling machine capacity to 1 1/4"
SAWING
- Automatic horizontal saw amada ha 250
- Automatic horizontal saw kalamazoo bs-300has
- Horizontal saw doall 0-12
- (3) manual band saws various capacities
MATERIAL HANDLING
- (2) Forklifts 6,500 pound capacity
|
|
